Showing posts with label Utah. Show all posts
Showing posts with label Utah. Show all posts
First SERIOUS Snow Storm
A light snow started the morning of November 18. As the day progressed it got worse (as you will see from the pictures below). Looking out of my office at Utah State University, it is obvious how quick the snow accumulated and the drive home was very slow and steady. The roads were slick and piled with snow.
Spring Crop Dusting in Northern Utah
Finally a nice spring day in Northern Utah. Area crop duster, Wayne Larsen, was even out and about.
An outstanding source confirms he appears to be flying a Thrush Commander.
An outstanding source confirms he appears to be flying a Thrush Commander.
My Brother's Machine Shop
Leading Edge Machine Moved into a New Building Just Before Christmas.
Parts of the office area are still under construction.
Controller for CNC lathe with live tooling.
Tool turret on CNC lathe.
"The Mule".
CNC Lathe.
Wire EDM.
Manual lathe and parts that have been bent on the press break.
CNC Lathe milling a part.
Raw material waiting to be machined.
A finished, plated trunnion.
Trunnion blanks.
Extra parts.
Extra parts.
Alder wood cabinets in the inspection room.
Reception area (unfinished).
Waterjet.
Sheet metal rack.
Finished parts.
Parts that have been waterjetted and waiting to have holes tapped.
Excess material.
Hand-made gun barrel.
Muzzle break.
Loading 2-inch thick aluminum plate into the waterjet.
Using the 2-Ton Overhead crane.
Loading 2-inch thick aluminum plate into the waterjet.
Finished parts.
4-Axis Mill.
Parts of the office area are still under construction.
Controller for CNC lathe with live tooling.
Tool turret on CNC lathe.
"The Mule".
CNC Lathe.
Wire EDM.
Manual lathe and parts that have been bent on the press break.
CNC Lathe milling a part.
Raw material waiting to be machined.
A finished, plated trunnion.
Trunnion blanks.
Extra parts.
Extra parts.
Alder wood cabinets in the inspection room.
Reception area (unfinished).
Waterjet.
Sheet metal rack.
Finished parts.
Parts that have been waterjetted and waiting to have holes tapped.
Excess material.
Hand-made gun barrel.
Muzzle break.
Loading 2-inch thick aluminum plate into the waterjet.
Using the 2-Ton Overhead crane.
Loading 2-inch thick aluminum plate into the waterjet.
Finished parts.
4-Axis Mill.
Subscribe to:
Posts (Atom)